It might be difficult to keep track of everything at construction sites since so many things are going on at once. If adequate and efficient management is lacking on-site, incidents may occur that have a negative impact on both the surroundings and the workers.
The buildup of trash that pollutes the environment and harms the soil is one of the main problems seen at every building site. Another common source of contamination at construction sites is stormwater runoff.
A building site must nearly always be dewatered. Dewatering entails pumping or evaporating groundwater away from the location. Dewatering is done before digging to bring the groundwater table down to the proper level. Excess water is one of the worst things that may happen to a contractor who is anxious to start a new project. Dewatering procedures are essential for preparing building sites because of this.
Oil-borne impurities and other sediments are captured and separated from stormwater using a dewatering bag. Dewatering filter bags should always be used at construction sites with machinery with a high risk of spilling oil.
-
Cost-Effective
There must be a cost-effective solution for a construction site that frequently deals with oil spills and stormwater runoff. To ensure efficiency during the building process, it is also necessary to eliminate the collected dirt and water.
All of these may be effortlessly collected by a dewatering bag, which is also readily recyclable. They come in a number of sizes, so it’s simple to choose one that meets your needs and your budget.
-
Eliminates All Unnecessary Items
A dewatering bag can easily filter out dirt, oil, oil sheen, pollutants that are affected by oil, dangerous particles, and sediment. If these undesirable particles get into the soil, they can seriously harm it and change the pH balance.
When it comes to demands for high discharge of water and sludge, the dewatering filter bags from BJ Geotextile are incredibly robust. This makes sure that no dangerous substances or chemicals are discharged into the environment.
-
Time-Saving
An effective dewatering bag will efficiently capture impurities and discharge water without taking too long. Almost no time is lost during setup because they are to be directly attached to the pipe that is releasing polluted liquids.
It makes sense to waste time filtering at a building site when every extra day is charged. Therefore, using a dewatering filtering bag can assure compliance with local, state, and federal laws without requiring you to spend a lot of effort stopping undesirable elements from reaching the soil and environment.
-
No Special Knowledge is Required
Dewatering filtering bags don’t need any professional assistance, unlike other filtering methods. In order to secure and use a dewatering bag at the end of a pipe, your team will require very little training.
You may start dewatering whenever you want without any effort thanks to this, which provides you peace of mind. The discharge pipe’s diameter and water pressure are the only information you need to be aware of.
-
Portable
Dewatering socks or bags may be convenient and portable, which is one of their finest qualities. It may be taken to a commercial laundry to be washed and reused when you’re done using it or when it becomes saturated.
You may fold and store them for later use once they have been cleaned and cleansed. A dewatering filtering bag differs from conventional filtering methods in that it is machine-free. This makes it a far better choice than bulky gas-based filtration systems.
-
Stable Ground and Working Space
Hazards like mudslides, shaky foundations, and equipment failure due to bogging can be avoided with the careful removal of extra water via dewatering. By doing this, you can also make sure that your job site is prepared for excavation, foundation construction, and cement footing pours. For site managers and workers, reducing the risks nearly always results in a consistent working environment.
-
Safety of Workers
Your staff may stay healthy, content, and most importantly, safe with the aid of the dewatering process. Standing water offers a variety of health dangers to site supervisors, personnel, their families, and the local community since it frequently becomes polluted. Additionally, it raises the possibility of workplace injuries brought on by slips and falls.
-
Scheduling
You can keep your building project on time by implementing an efficient dewatering plan. At any point in the process of building, project sites may encounter difficulties, such as floods from nonstop rain and unforeseen storms. Effective dewatering cuts down on pointless delays.
Best methods for Dewatering a Construction Site
When it comes to dewatering building sites, there are a number of well-liked and successful techniques. Furthermore, it is acceptable if you lack expertise in these techniques because there are numerous service providers that focus on this.
Let’s examine the four most popular dewatering techniques and discuss their benefits and drawbacks so you can decide which could be the finest. We advise consulting with businesses with relevant experience for further in-depth information.
   1. Wellpoint
Wellpoint is one of the most popular and economical ways to appropriately dewater building sites. The wellpoint dewatering technique comprises of a number of little wells that are spaced properly around the excavation and bored into the earth to a specified depth. These wells are linked to the surface through pipelines with valves and pumps to remove the water below the surface.
   2. Sump Pumping
Sump pumping is another typical dewatering technique. Instead of using force, sump pumps rely on gravity. This technique is applied in shallow excavation regions when the soil contains a lot of sand and/or gravel. This technique can make use of a ditch and a long, narrow sump if the excavation area is sizable. Numerous subcontractors and businesses may effectively complete this assignment using this way since it is more affordable.
   3. Educator Wells
Although deeper well dewatering is a more labor-intensive and expensive technique, many projects find its use to be vital. To provide stable working conditions in excavations, deep good dewatering uses ejector (or educator) dewatering devices to decrease groundwater levels. Installation depths of over 50 feet are possible for ejector systems, which extract groundwater. Additionally, the extracted water has higher concentrations of particulates as a result of this procedure.
Dewatering is a crucial factor for construction project managers to take into account throughout the conceptual design, excavation, and foundation phases of any project. As a recognized construction expert, you can secure a strong foundation for your project, avoid erosion, and safeguard the environment.
